ManualSpace

2002-06 Acura RSX QuickLIFT Installation Guide Please gather the following tools before you begin the installation: * Power Drill * 3/16 drill bit * Fine permanent marker or felt tip pen * Tape measure or ruler * Masking tape * Hammer & center punch * Rivet gun, capable of 3/16 rivets (most brands can handle this size) Note: Only use the rivets supplied in the QuickLIFT system. Recommended: Craftsman standard or Swivel Riveter (shown 974749) $9.99 to $17.99 Remove all items from the packing tube. You should have the following before beginning: * (2) Gas springs ( RT-QL-120-10A ) Be sure to cycle them a few times before installing. * (4) 3/16 1steel rivets (used on hood brackets) * (2) ball-studs and washers * (2) brackets used on hood frame * Printed Color Instructions * Gas Spring locking clips (Already installed in the gas spring ball-ends A. Leave your hood closed. B. Using a piece of masking tape and a permanent marker, carefully measure from the hoods corner (near hinge and windshield) and along the fender line. Wrap the end of the tape measure over the corner lip and place a mark on the hood masking tape at 14 This mark will be used to align the centerline of the brackets ball-stud in the next step. Step 1 Unpack QuickLIFT system and verify contents. Step 2 Gather the required tools. Step 3 Mark centerline of hood bracket location. 2002-06 Acura RSX QuickLIFT Installation Guide This manual is property of Redline Tuning LLC. Any unauthorized duplication or use without written permission from Redline Tuning LLC, violates Copyright laws. Copyright © 2003 Redline Tuning LLC. All Rights Reserved. ACURA RSX Manual Rev. 1.01 10/2/2007 14 (QTY 2 )ball-studs/washers (QTY 2) (4 rivets) A. Carefully drill the hole as shown to the right using a 3/16 bit. Wrap a piece of electrical tape around the drill bit about 1/4 from the tip to prevent the bit from denting the hood skin. Use new and sharp bits! A drill stop can be used to keep the drilling shallow as ...
Host: www.redlinetuning.com

 

Download 2002-06 Acura RSX QuickLIFT Installation Guide