ManualSpace

# 300-561 INSTALLATION INSTRUCTIONS 87-00 Dodge Caravan/Plymouth Voyager 3.0, 3.8L Parts List (1) Power Plate (2) Gaskets (2) 8mm x 90mm Bolts (2) 8mm Washers Tools List 13mm Socket Standard Screwdriver Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the instruction manual carefully before proceeding with the installation.  Contact AIRAID @ (800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instructions           that are not clear to you.  Your PowerAid Throttle Body Spacer was carefully inspected and packaged.  Check that no parts are missing, or were damaged during shipping.  If any parts are missing, please contact AIRAID. Thank you for selecting AIRAID. Installation Instructions. Read Me! 1. DISCONNECT NEGATIVE (-) BATTERY CABLE. 2. Remove throttle body air intake assembly. 3. Remove (2) nuts from the throttle body and (2) studs from manifold. (Ref. "C") 4. Remove gasket and clean surfaces. 5. Install power plate with (2) gaskets. A. Locate one gasket between the throttle body and power plate. B. Locate second gasket between power plate and manifold. 6.    Install (2) bolts and washers using Step 3 as an example. 7.    Inspect & Test the throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables     may require adjustment. Please refer to your vehicles service manual for proper adjusting. 8.    Reinstall the throttle body air intake assembly using Step 2 as an example. 9.    Reconnect battery cable. Enjoy! The sound of power.The "whistle" means its working! Rv. 12/04/06 Ref. "A"- (1) Power Plate   (2) Gaskets Ref. "B"- Throttle Body Ref. "C"- (2) 8mm x 90mm Bolts   (2)  Washers AIRAID Filter Co. 2688 E Rose Garden ...
Host: www.airaid.com

 

Download 300-561 INSTALLATION INSTRUCTIONS 87-00 Dodge Caravan/Plymouth ...