ManualSpace

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT. GROSS LOAD CAPACITY WHEN USED AS STRAIGHT LINE PULL: LBS. MAX. LINE PULL. DO NOT EXCEED VEHICLE MANUFACTURERS RECOMMENDED TOWING CAPACITY.*** HITCH WEIGHT: LBS. INSTALL TIME: MINUTES INSTALL NOTES: INSTALLATION STEPS PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND. Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper instal ation of this product voids the warranty. Curt Manufacturing Inc.s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage. 3,500 350 33 30 9,000 31367 TOYOTA FJ CRUISER 1 2 5/8-11 x 1 3/4 CARRIAGE BOLT 2 2 5/8-11 HEX FLANGE NUT 3 2 CM-31367-SP .250 x 1.50" SQUARE HOLE SPACER Parts List ITEM QTY PART NUMBER DESCRIPTION PASSENGER SIDE FRAME RAIL FRAME CROSS MEMBER 2 3 1 EXISTING FRAME STUDS AND FLANGE NUTS USE EXISTING HEX FLANGE NUTS TOW LOOP REMOVE LOWER NUT ON THIS SIDE AND NUT FROM INSIDE (BOTH SIDES) PASS BOLT THRU AND INTO POSITION 1) Remove hex flange nuts from end of frame rail (lowest 2 on each side) as shown above. Re-use in step 4. 2) Lift hitch into position, locating the vehicle tow loop brackets under the hitch mounting plates. 3) Insert 5/8" bolts thru the front plates and into position thru the tow loops. 4) Loosely install 5/8" nuts and supplied spacers then re-install the flange nuts removed in step 1. 5) Torque all 10mm fasteners to 37 lb-ft and all 5/8" fasteners to 150 lb-ft. - NO D ...
Host: fileresource.sitepro.com

 

Download 31367 TOYOTA FJ CRUISER