ManualSpace

1 INS-042 2.7.2006 VERSION: 4717 GOLDEN FOOTHILL BLVD â?¢ EL DORADO HILLS, CA 95762 â?¢ 916.933.1080 â?¢ FAX 916.939.9196 â?¢ www.comptechusa.com â?¢ M-F 8:00 AMâ??5:00 PM PST Parts list: 1 - Exhaust assembly (91-94#230-005) Adaptor Kits: (95-99 #230-001) (00-06 #230-002) Acura NSX Exhaust System (1991-2006) Installation Instructions Kit #230-005,#230-006, & #230-007 Thank you for purchasing the Comptech Stainless Steel Exhaust system for the Acura NSX (1991-2006).  All components      have been designed and manufactured utilizing the latest in technology and materials. Please take a moment to read this instruction manual and warranty information page thoroughly before starting any work. Always work in a clean environment     and use the appropriate safety equipment and tools to avoid any potential damage or injuries. Comptech recommends the use of a Genuine Acura Service Manual to supplement these instructions. All Comptech products are intended to be installed        by a professional installer. Many stock parts are reused during installation.  Do not damage or discard any pieces during disassembly or installation. â?¢ Remove Stock Exhaust System: disconnect the stock exhaust system from the catalytic converters by removing the connecting hardware. Use a spray lubricant to loosen up the rubber hangers that support the exhaust. Be careful not to damage the rubber hangers during removal. After one side is down, the other side will be easier to get to and disconnect the remaining hangers. The exhaust can now be removed and set out of the way. â?¢ Install Rubber Hangers on Comptech System: Apply some more lubricant on the rubber hangers and slide all the hangers onto the mounting points on the Comptech Exhaust System in the same locations and orientation as the stock muffler. Note: If the rubber hangers have plastic ...
Host: comptechusa.web01.yourhost.com

 

Download Acura NSX Exhaust System (1991-2006) Installation Instructions