ManualSpace

AEROMOTIVE Part # 18601 83-93 Mustang Sumped Fuel Tank INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend that this installation be carried out by a qualified automotive technician. Installation of this product requires handling of gasoline. Ensure you are working in a well ventilated area with an approved fire extinguisher nearby. Extinguish all open flames, prohibit smoking and eliminate all sources of ignition in the area of the vehicle before proceeding with the installation. When installing this product, wear eye goggles and other safety apparel as needed to protect yourself from debris and sprayed gasoline . WARNING! The fuel system is under pressure. Do not open the fuel system until the pressure has been relieved. Refer to the appropriate vehicle service manual for the procedure and precautions for relieving the fuel system pressure . Aeromotive system components are not legal for sale or use on emission controlled motor vehicles. This kit contains the following parts: 1 ea fuel tank kit 1 ea fuel tank w/sump 1 ea Block-off plate The following steps are typical of most installations: 1-1. Once the engine has been allowed to cool, disconnect the negative battery cable and relieve the fuel system pressure. 1-2. Raise the vehicle and support it with jack stands. 1-3. Referring to the appropriate vehicle service manual for instructions, drain, disconnect any electrical and fuel component connections and remove the OEM fuel tank. The removal of the vehicles exhaust system may be necessary for fuel tank removal. 1-4. Once the OEM fuel tank has been removed, remove the plastic fuel tank shield from the bottom of the tank. 1-5. Measure the position of the sump on the supplied Aeromotive fuel tank and mark the plastic fuel tank shield accordingly. Using an ½" drill bit, drill the four corners of the sump ...
Host: www.aeromotiveinc.com

 

Download AEROMOTIVE Part # 18601 83-93 Mustang Sumped Fuel Tank INSTALLATION ...