ManualSpace

Audi Clamping Adapters Users Manual For Audi A-2 2006 © Chief Automotive Technologies, Inc. Chiefs Limited One-Year Warranty &Liability CHIEFS LIMITED ONE-YEAR WARRANTY& LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date of installation and/or purchase any of its products which do not perform satisfactorily due to defect caused by faulty material or workmanship.  Chiefs obligation under this warranty is limited to the repair or replacement of products which are defective and which have not been misused, carelessly handled, or defaced by repair or repairs made or attempted by others. CHIEFAUTOMOTIVE TECHNOLOGIES, INC. DOES NOTASSUME RESPONSIBILITY FOR ANYDEATH, INJURYOR PROPERTYDAMAGE RESULTINGFROM THE OPERATORS NEGLIGENCE OR MISUSE OFTHIS PRODUCTOR ITS ATTACHMENTS.  CHIEFMAKES NO WRITTEN, EXPRESS OR IMPLIED WARRANTYWHATSOEVER OFMERCHANTABIL- ITYOR FITNESS FOR APARTICULAR PURPOSE OR OTHERWISE REGARDINGTHE EQUIPMENTOR ANYPARTOFTHE PRODUCTOTHER THAN THE LIMITED ONE-YEAR WARRANTYSTATED ABOVE. AUDI A-2 CLAMPING ADAPTERS USERS MANUAL IMPORTANT: • Information on the use of anchoring stands (including their attachment to the EZ Liner mainframe)       appears in the Universal Anchoring Systems Owners Manual. (Part No. 618740.) •  Read all of these instructions prior to using the Audi A-2 Anchoring Accessory. •  Clean jack tubes using one of the anchoring pins. (See Figure 1.) a.  Insert a steel punch (or bar) through the 1/2 inch hole at end of pin and use it as a handle. b.  Rotate the pin right and left as it is moved in and out of the jack tube hole. NOTE: Holes must be clean to allow for easy installation and removal of the anchoring    assembly. IMPORTANT: DO NOTuse force to drive the pin into the jack tube. Using force to drive the pin into the hole may make it difficult (or ...
Host: www.chiefautomotive.com

 

Download Audi Clamping Adapters