ManualSpace

 1994-2004 Ford Mustang A-Pillar Gauge Pods (U. S. Patent Pending) Installation Guide Congratulations!   In your hands is an A-pillar gauge pod that represents the highest degrees of engineering, build-quality, and style.  You have chosen a product that was born from the belief auto accessories should adhere to a higher standard.  Assembled by hand in the USA, this pillar will give you the satisfaction of owning a custom part instead of the same old thing. The installation of this part should be an enjoyable task, and may be accomplished with minimal mechanical knowledge and basic hand tools.  The instructions will differ slightly from coupe to convertible, as the parts attach to the car in a different manner.  These differences are clearly noted for your convenience. A word about "Dry Fitting": We know the first thing you would like to do is snap your pillar in place to check it out.  This is a safe practice, but we ask that you exercise some care while doing this. If you have a 2004 coupe pillar or a 1999-2004 convertible pillar, please use care to properly brace the black plastic subframe so it will not be torn from the pillar cover while removing the pillar. Lets get started on the install! • Step One     Removal of OEM A-Pillar Hardtop Mustang: Your factory pillar is attached to the car with a pair of metal clips that lock the pillar onto the metal frame of the windshield.  To remove this part, work your fingers under the plastic of the pillar at the top of the windshield (where the pillar meets the headliner).  Applying even pressure, pull the pillar away from its mounting point.  A firm, slightly quick motion will release the upper clip with ease.  Once the upper clip is free, continue to pull the pillar towards you to release the lower clip. If you would like a little more help, refer to the video clip on our website! www. ...
Host:

 

Download CHEVROLET CORVETTES C1 - C5