ManualSpace

Edge EZ Module Cummins1998.5-2002 Dodge ® Manual Version 110105 Thank you for purchasing the Edge Module for the 24 Dodge Valve Cummins®.  The Edge has been developed and produced of the highest quality to ensure the best performance for years to come.  If you have any concerns or questions please contact us. The Edge Module is a high performance product It is strongly recommended that EGT gauges and boost gauges be installed with the use of this product. THIS PRODUCT MUST BE REMOVED WHEN TAKING VEHICLE TO VEHICLE DEALERSHIP OR OTHER SERVICE FACILITY!! LEAVING PRODUCT INSTALLED MAY AFFECT DEALER DIAGNOSTIC ANALYSIS AND SCAN TOOL FUNCTIONS!! Edge Products Inc. The installation of this product indicates that the BUYER has read and understands this agreement as well as the "disclaimer of liability" agreement contained at the end of this document and accepts its terms and conditions. Installation Instructions IMPORTANT:  Read all Disclaimer, Warranty, and Installation Instructions before installing product Items Required: Pliers Flat tip Screwdriver 1/2" Wrench 3/8" Drive Ratchet & Sockets 1/4" Socket 5/16" Socket 7/16" Deep Well Socket Supplied Items: 1. Edge EZ Module 2. Three Wire Ties 3. Two Velcro Strips 4. One Hose Clamp 5. One 90° Brass Fitting Edge Products Inc. Edge EZ Module Installation Instructions Please read these instructions through completely and thoroughly MAP Sensor & 2000-2002 Data Link 1998.5-1999 Data Link understand each step prior to installation. Module Installation 1. The Edge EZ Module can mount on the flat black plastic fuse box cover located on the drivers side fender.  Adhere the module using the supplied velcro, allowing enough harness movement for removal of the cover. Data Link Connection 2. The Data Link connector is located in different locations based on the year of the truck: • 98.5-99 the triangle shaped conne ...
Host: www.edgeproducts.com

 

Download EZ Dodge 98.5-02 Instructions