Home > Automotive > Ford

Ford 2005-07 Mustang Pulleys Installation Instructions (Read Carefully ...




Manual80                                                                                                                                                          1 © 2000-07 Granatelli Motor Sports, Inc. - All Rights Reserved - Intl. Copr. Secured -16February2007 V 1.0 Granatelli Motor Sports, Inc. • 1000 Yarnell Place • Oxnard, CA 93033-2454 805-486-6644 (Phone) • 805-486-6684 (Fax) • Hours: M-F 8AM-5PM (PST) www.GranatelliMotorSports.com/techsupport.htm TechSupport@GranatelliMotorSports.com Ford 2005-07 Mustang Pulleys Installation Instructions (Read Carefully Before Starting Project) P/N GM-UP05 Tools Needed: Torque Wrench Sensor Safe High-Temp Silicone Sealer Universal three prong puller Socket Set Parts Needed: New Crank pulley Bolt (Ford part # F5RZ-6A340-B) 1: Verify that your kit has all the parts included. The kit comes complete with a smaller iron crank pulley, an oversized water pump pulley, and the instructions. 2: Remove the air intake, this step isnt required but makes for a much easier installation when you are not fighting the OEM rubber intake tube or a cast CAI tube. I have also found it helpful to remove the electric fan by removing the two 8mm ...
Download Ford 2005-07 Mustang Pulleys Installation Instructions (Read Carefully ...






Related Manuals:


Most people are coming to this page searching for: