ManualSpace

63-1 Front bumper (Audi RS6) Assembly overview 1 - Air inlet grille To remove pull grille forward 2 - Air inlet grille To remove pull grille forward 3 - Screw 2.5 Nm 3x 4 - Bumper cover Together with impact absorber, removing and installing Page 63-6 Cross member from bumper cover removing and installing Page 63-16 5 - Screws 2.5 Nm (22 in. lb) 3x 63-2 6 - Retainer For headlight washer nozzle 7 - Lid For headlight washer nozzle 8 - Impact absorber 9 - Socket head bolt 23 Nm (17 ft. lb) 2x Install after bumper installation Height adjustment to cross member is self- compensating Page 63- 13 10 - Horn 11 - Cross member From bumper cover, removing and installing Page 63-16 12 - Nut 11 Nm (8 ft.lb) 13 - Bolt 50 Nm (36 ft. lb) 6x 63-3 Repair Manual; Electrical Equipment; Lights,switches - Exterior, Repair Group 94 14 - Impact absorber Removal and installation Page 63-20 15 - Torx bolt 1.5 Nm (13 in. lb) 2x 16 - Bracket For fog light 17 - Fog light Removing and installing 18 - Rivet 12x 19 - Torx bolt 4 Nm (3 ft. lb) 4x 20 - Headlight washer nozzel assembly For headlight cleaning 21 - Torx bolt 25 Nm (18 ft. lb) 4x 63-4 22 - Bumper trim piece 23 - Rivet 24 - Nut 4 Nm (3 ft. lb) 6x 25 - Sleeve Prevents damage to paint surface of bumper cover and fender during remoal and installation process 26 - Screw mount 6x Install sleeve - 25- before bumper cover installation 27 - Fog light cover for fog light Removal and instalation Page 63-5 28 - Screw 1.5 Nm (13 in. lb) 4x 63-5 Fog light cover, removing and installing (Audi RS6 only)  Removing - Pull air grille forward -arrow- - Remove screws -1- and -3- - Swivel fog light cover -2- to outside edge of bumper cover -arrow- - Remove cover 63-6 Front   bumper c ...
Host: www.carbonlord.com

 

Download Front bumper (Audi RS6)