ManualSpace

Installation instructions For set # 8.3117 97-01 CAMRY / 95-99 AVALON 00-03 AVALON / 99-03 SOLARA It is recommended that if you are unfamiliar with this type of work that you refer to a qualified service center specializing in this type of work. It is also recommended that if you choose to do this work yourself that a factory service manual be obtained for the proper procedures pertaining to removal, replacement and proper torque specifications for your vehicle.  This instruction set is intended as a guideline for the safe installation of Energy Suspensions polyurethane bushings, once you have removed the factory components from your vehicle. 17397 28/AUG/03 BRH Parts list for set: 8.3117 2  -  3335 front position (reuse factory pin). 2  -  3336 rear position (must remove outer metal shell). 2  -  15.10.167.39 sleeve (.875" x .563" x 1.960"). 3  -  9.11108 grease. 1  -  17397 this instruction sheet. Updated 8/JAN/03   BRH 2003 Energy Suspension. All rights reserved. 2003 Energy Suspension. All rights reserved. C C May not be reproduced, in any form, or by any means, without the written consent of Energy Suspension. May not be reproduced, in any form, or by any means, without the written consent of Energy Suspension. 1131 VIA CALLEJON, SAN CLEMENTE, CA  92673 R Energy Suspension recommends that you read over all the installation instructions and check all P/Ns and quantities in the parts list before you start. Call customer service at 949-361-3935 if the parts in your kit do not match this parts list. Use arbor press to remove rubber  and pin Remove  all old rubber from pin Remove all sharp edges that will come in contact with the polyurethane. Remove all sharp edges from leading edge of pin to prevent cutting bushing Smooth When pressing out old bushing,  allow about 2 mm or .080" for clearance. I.D. of ...
Host: www.energysuspension.com

 

Download Installation instructions For set # 8.3117